General Information
What is Reconstituted Stone?
Reconstituted Stone - is manufactured from the
highest grade materials and will last for years. It is hand
crafted, with moulds taken from original natural flagstones for an
authentic appearance. Bradstone products are a constant thickness
and is therefore easy to lay. The more traditional styles, such as
Old Town and Old Riven, are particularly suited to the classic
style of British country gardens.
Colors - shades are subtle and subject to
slight variations, especially highlighted in the weathered shades
where many products are hand made to ensure a completely random,
natural look. Colors will appear different depending upon the
prevailing conditions such as sunlight, heavy shade or rain,
therefore it is advisable to check the color and appearance of the
actual product samples in dry daylight conditions before purchase.
Where possible, products should also be selected from the same
production batch. Reconstructed stone will weather over time in a
similar way to natural stone.
Paving Color Swatches
Products are manufactured at factories located in different
areas of the United States, therefore significant variation in
color and texture can occur when compared with the colors shown in
the swatches. Please note that some products have a multi-color mix
where the manufacturing process means that different color
percentages are likely between packs. For the best overall effect
we advise that pavers are chosen from three to five different packs
and from vertical columns rather than horizontal rows.
Multi-colored products are produced randomly, therefore color
proportions in different pavers may vary widely.
Application/Suitability
Unless otherwise stated, the Bradstone materials featured in
this catalog are intended for use for domestic landscape projects.
Bradstone decorative paving is not suitable for driveways. The
manufacturer cannot accept any liability where products have been
used for any inappropriate purpose. In the unlikely event of
products reaching you in a less than satisfactory condition, please
contact your local distributer or Bradstone directly, allowing time
for the rejected product to be replaced. If a complaint is raised
after laying the product, Bradstone cannot accept responsibility
for any defect. De-icing salts should not be used on the Bradstone
paving.
Sizes & Joint Widths
All dimensions quoted in this catalog are nominal and are for
guidance only. Actual sizes will vary, particularly on the products
designed to replicate natural stone which have features such as
riven profiles and fettled edges. Where space is critical,
Bradstone recommends dry laying the product to check area required.
The sizes and quantities given in the paving tables on page 28
usually allow a nominal 1/2" joint width. When laying random paving
and circles, and in particular Wetherdale Paving and Old Town
Flagstone Paving with their fettled edges, joint widths will depend
on the paving type and laying pattern chosen and will be variable -
from approximately 12" to 1 ".
Handling
Standard manual handling techniques should be adopted when
handling products. Some products in the Bradstone range are heavy
or an awkward shape to lift and it is recommended that suitable
lifting equipment is used for these products. Always wear gloves
and safety footwear when handling product. If product is to be cut
always wear safety goggles and when using a high speed cutter also
wear suitable respiratory protection, such as a dust mask. Before
removing wrapping or banding, ensure that the products are on level
ground or retained in some way to prevent fall over. When removing
shrink wrapping and banding use the appropriate cutting tools; also
it is recommended that safety goggles are worn. Product should
always be handled with care as breakages, chipping and other damage
may result from mishandling. Minor scuffing can occur due to
movement in transit and will generally disappear in time. If in
doubt do not install the product. Consult your Bradstone
Representative.